home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > projects & restorations

Reply
 
Thread Tools Display Modes
Old 08-12-2019, 08:21 PM   #251
sksmith
Board Member
 
sksmith's Avatar
 
Join Date: Nov 2007
Location: Back in St. Louis, MO
Default

Quote:
Originally Posted by matt b View Post
You can still buy them from places like VP, etc... P/N 686833: $85, and there is an economy version available with VP-Autoparts for $55.

I bleached my brake fluid reservoir and washer fluid jar. Haven't gotten to the overflow tank yet, but it worked well on the others.
The reason I went that route was because one of them isn't reproduced correctly. I think it was the brake fluid reservoir, and I didn't want them to look different.
You may want to give that a shot.
Steve
sksmith is offline   Reply With Quote
Old 08-12-2019, 08:45 PM   #252
didenpx
Board Member
 
didenpx's Avatar
 
Join Date: Feb 2012
Location: Live Free or Die
Default

Thanks for the positive feedback to all; it helps counteract the rust repair induced PTSD.

To answer questions:
-Steve - not sure if AAV is good; that will be first thing I check out on the idle hunt. I'll test out the bleach trick on one of my other used spares and see how that goes.
-Ian - Also concerned about freaking out driving it. I really didn't set out to create a garage queen, so hopefully I'll get over it.
-Ian & Matt - I saw the sources for the coolant overflow bottle when I was pulling parts and detailing them for the engine bay. Unfortunately I'm selectively stingy and had several used ones on hand
-John, Doug & Vol242vo - thanks very much! The ladies at Lost Legends (Viv & Tracy) are very meticulous craftsmen.
__________________
My feedback: http://forums.turbobricks.com/showth...hlight=didenpx

1970 1800E (Project Roedluvan:http://forums.turbobricks.com/showth...highlight=1970)
1977 242DL "Senf" (Summer Cruiser)
2x1973 1800 ES (Project Reanimator; disassembly and parts detailing to begin Winter 2020)
didenpx is offline   Reply With Quote
Old 08-13-2019, 05:19 PM   #253
Duder
His Dudeness, El Duderino
 
Duder's Avatar
 
Join Date: Dec 2009
Location: Torrance, CA
Default

Here's another echo of the sentiment - the car looks fantastic, especially knowing how it started and what you've been through to get it here. Those wheels are a great choice too. I don't see them used much on any Volvo but they look sweet on an 1800 coupe.

My opinion - drive the thing with abandon once it's finished. Keep it protected, maintained, cleaned & waxed... but don't stress too much. Enjoy the fruits of your labor. Not many of us get to experience a nearly new classic Volvo. Jay Leno says something along the lines of "I buy perfect #1 condition cars, then enjoy driving them down to a #2 or #3." Live it up.
Duder is offline   Reply With Quote
Old 08-13-2019, 06:17 PM   #254
hiperfauto
Board Member
 
hiperfauto's Avatar
 
Join Date: Nov 2011
Location: So Cal
Default

You probably just need to lower the idle. D-Jet cuts power to the injectors when the rpm is over 1300 and the throttle switch is closed. If there's too much air bypassing the throttle plate you'll get that surging idle. Adjust the throttle stop so that the screw is turned 1/3 to 1/4 turn past contact with the lever. Then adjust the idle with the screw/jam nut under the intake hose. You may need to re-adjust the throttle switch after adjusting the stop.

The car is really looking good. I noticed that your missing the trim around the side markers though. Is that on purpose or are they out getting plated?
hiperfauto is online now   Reply With Quote
Old 08-13-2019, 07:24 PM   #255
didenpx
Board Member
 
didenpx's Avatar
 
Join Date: Feb 2012
Location: Live Free or Die
Default

Duder; thanks very much! We'll see how things go regarding Jay Leno's advice.

Ian; thanks for reminding me to start with the basics and work my way up. I will do as you suggest and report what I find. Bezels for the side markers are polished and will be going back on.

Hoping I'll have the car back home for keeps in 2-3 weeks at which point I will sort out the idle, sort out a few wiring issues, and go from stem to stern torquing things to spec.

Last edited by didenpx; 08-13-2019 at 07:32 PM..
didenpx is offline   Reply With Quote
Old 08-15-2019, 08:11 PM   #256
vintagewrench
Board Member
 
vintagewrench's Avatar
 
Join Date: May 2016
Location: Vermont
Default

Quote:
Originally Posted by sksmith View Post
I bleached my brake fluid reservoir and washer fluid jar. Haven't gotten to the overflow tank yet, but it worked well on the others.
The reason I went that route was because one of them isn't reproduced correctly. I think it was the brake fluid reservoir, and I didn't want them to look different.
You may want to give that a shot.
Steve
Did you actually use bleach to clean overflow bottles in the past or something else?

Have one that needs the treatment.
__________________
1967 1800s - - - 1968 122s Station Wagon
vintagewrench is offline   Reply With Quote
Old 08-15-2019, 10:04 PM   #257
sksmith
Board Member
 
sksmith's Avatar
 
Join Date: Nov 2007
Location: Back in St. Louis, MO
Default

Quote:
Originally Posted by vintagewrench View Post
Did you actually use bleach to clean overflow bottles in the past or something else?

Have one that needs the treatment.
Not on the overflow bottle, yet. I did do the brake & washer reservoirs. And to clear it up, it was warm water, Dawn detergent & Clorox bleach. Then rinsed with a lot of water again.
They do not look brand new, but came out pretty damn clean.
Sorry, no pictures. Maybe I get the master cylinder out of the storage box & shoot a picture tomorrow.
Steve
sksmith is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 01:23 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.