• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

First mods?

Nugget

New member
Joined
Dec 8, 2017
Location
UK
Hey guys,

I've just bought myself a 940, 2.3lpt (B230FK). 'stage 0' has been done, now it's time for more power.

I've read than you can get 200bhp straight away from a bleed valve, by cranking the pressure up to 12 psi. Is this safe?

If so, whats next on the list? Exhaust, then bigger turbo?

Cheers guys
 
Do you know if it needs to be chipped or not? I read somewhere the fuel adjusts automatically on the newer ECU's

LH2.4 will fuel cut around 13psi give or take. Look up the MAF mod and match your injectors while you're at it. You could use volvo's original 3" maf but I'm too cheap for that so the mod was my path of choice. After this, LH2.4 should handle many more boosts. Don't forget to match the injectors though.
 
I have a lot to learn ��. Thanks guys, I appreciate it ��
 
Back
Top