- Joined
- Nov 12, 2002
Anyone off hand happen to know the dimensions on the 940 center inlet inter cooler? I think it might work well for a project and kind of want to catch the do88 sale today.
-
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software hereThank you for being a part of our community!
940 center in/outlet IC dimensions
- Thread starter Hank Scorpio
- Start date
iHateVolvoPeople
Active member
- Joined
- Feb 1, 2014
- Location
- Midwest
Do you want just the core dimensions, or everything? I have one in my garage and I’d be happy to get some numbers for you.
- Joined
- Nov 12, 2002
Core width and height and over all dimensions would be amazing. Doesn?t have to be to the millimeter.
iHateVolvoPeople
Active member
- Joined
- Feb 1, 2014
- Location
- Midwest
Core depth: 1.5"
Core width: ~24", I’ll provide a pic so you can make your own judgement. This is from metal crimp to metal crimp
Inlet/outlet: to me looks closer to 2.25" OD
pics to come
Overall core height: just over 15.5"
At the widest section (inlet to outlet): just over 32"
Core width: ~24", I’ll provide a pic so you can make your own judgement. This is from metal crimp to metal crimp
Inlet/outlet: to me looks closer to 2.25" OD
pics to come
Overall core height: just over 15.5"
At the widest section (inlet to outlet): just over 32"
Last edited:
- Joined
- Nov 12, 2002
Excellent! So does this jive about right?
iHateVolvoPeople
Active member
- Joined
- Feb 1, 2014
- Location
- Midwest
Yes. Except I’m not sure about the 27" from inlet to outlet because I didn’t measure there, but the math makes sense.
My measurements weren’t exact of course but I’d say your diagram is pretty spot on. Others might chime in with more measurements.
My measurements weren’t exact of course but I’d say your diagram is pretty spot on. Others might chime in with more measurements.
- Joined
- Nov 12, 2002