home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Reply
 
Thread Tools Display Modes
Old 02-04-2019, 07:35 PM   #1
nel621
Board Member
 
Join Date: Apr 2009
Default dumb taillight question

I'm sure it's been mentioned but I can't find it. Why the extra opening in the taillight? Can you just add the extra socket and bulb and have light? The circuit board already has the contacts. What was it that IPD used to sell to have more taillights light up? Was that for 85 and older or could it be used on 86 and later cars? thanks
nel621 is offline   Reply With Quote
Old 02-05-2019, 12:49 PM   #2
esmth
dirty swede
 
esmth's Avatar
 
Join Date: Jul 2016
Location: Massachusetts
Default

not sure what the stock circuit board has that missing bulb wired to, but I hardwired my tails and made the 3 lower panels the 5w tail lights while the upper red is a 21w brake light. Works fine and looks p cool

also to note, the oem tails from my car did not have a bulb spot in the lower center spot. It was blocked off. But the aftermarket tails i put in do.
__________________
1991 244 LH2.4 m46 295k miles B cam, 935 fuel & 175 ezk, pink injectors, 421 header and 2.5" exhaust
esmth is offline   Reply With Quote
Old 02-05-2019, 01:58 PM   #3
dl242gt
Can play the blues
 
dl242gt's Avatar
 
Join Date: Jun 2002
Location: S NJ, a suburb of Phila.
Default

Ipd sold a kit that let you add a brake light to the lower outer corner on each lite. It gave you four brake lights by using a double filament bulb in the lower outer corner on each light. On the earlier six panel lights the upper inner is the brake light. I've had that on my turbo for many years.

I would add an extra 5w bulb to that middle lower spot. on the circuit board it's wired to the parking/running lights so is easy to add like described above.

Last edited by dl242gt; 02-05-2019 at 01:59 PM.. Reason: remove word
dl242gt is offline   Reply With Quote
Old 02-05-2019, 04:23 PM   #4
nel621
Board Member
 
Join Date: Apr 2009
Default

I need to double check to see if the lights are OE or aftermarket. I do want to keep the circuit boards and not have to fab up a harness for the light sockets. On my 89 the lower outer are already the brake light/ taillight. Interesting that all the boards are set up for 6 lights but not all lamps have 6 outlets.
nel621 is offline   Reply With Quote
Old 02-06-2019, 03:34 AM   #5
John242Ti
LH-Jet & Carb Free Zone
 
John242Ti's Avatar
 
Join Date: May 2003
Location: Duvall, WA
Default

I had the iPd kit (actually a recreation of it) on my original '81 242 that I upgraded to Cibie tails from the Bosch units. With the 3rd brake light that I also added, I kept blowing fuse 6. Wound up replacing the passenger side taillamp assembly and the driver's side circuit board with 1985-on parts. Moved the brake lights to the outer corners. Every 242 I've owned since then, I've updated to the 1985-on setup. But, I never wired in the rear fog lamps until I got my current 242.

None of the tails actually have a socket for the third tail bulb, but some have a larger hole than others do. The 1979-84 assemblies usually have a small hole in the middle, and the 1985-93 assemblies have a hole that's almost large enough for the third socket.
__________________

1982 242Ti - black, M46. 1985 245Ti - blue, M46. Formerly Blue245Ti, 245GT-Turbo, and, originally 242GT-Ti.
John242Ti is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 08:36 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.