home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 05-16-2018, 03:25 AM   #1
maxitoman007
Board Member
 
Join Date: Feb 2017
Location: Calgary, Alberta, Canada
Question Will this clutch setup hold 300hp?

Ok so my M46 in my 87 740 wagon pushing 20 psi through an eBay turbo is slipping in 3rd.
I found a good deal on some clutch parts on here (thanks sbabbs) and I now have a brand new clutch disc and PP ready to go in. My question now is if it will hold my power well while still providing a bit of insurance for the M46.

The setup is a clutchnet yellow pressure plate, and an OEM Volvo clutch disc. But here’s the catch, the disc is designed for a d24 diesel Volvo... Don’t know if that’s good or bad news. Only difference I can find between the stock 740 clutch discs and my new diesel stock clutch disc is an extra smaller set of springs on the diesel disc. Aside from there being the 4 main springs on the disc just like there is on the stock 740 discs, there is also a set of green smaller springs in a triangle arrangement...

Please enlighten me on if this is a good setup for my car. Talked to a guy in Sweden who says that there they always run upgraded PPs with stock discs to prevent grenading M46s. He says some are holding around 400hp....

What do you guys think?
maxitoman007 is offline   Reply With Quote
Old 05-16-2018, 07:02 AM   #2
VB242
These Pipes Are Clean!!
 
VB242's Avatar
 
Join Date: Sep 2011
Location: Virginia Beach
Default

I want to see the m46 that held 400hp.
__________________
1980 primer JDM flares franken-242DL, 1989 silver 780 sienna rear spring nivomat delete
VB242 is online now   Reply With Quote
Old 05-16-2018, 12:42 PM   #3
GTJordan
Been here for too long
 
GTJordan's Avatar
 
Join Date: Jul 2002
Location: Edmonton AB
Default

Put it in and try...
__________________
80 242- 2.5L, T5, Porsche brakes, short billies and kaplenkhe suspension, trutrack.
Project Thread- http://www.turbobricks.com/forums/sh...d.php?t=324470
GTJordan is offline   Reply With Quote
Old 05-16-2018, 12:54 PM   #4
EivlEvo
Board Member
 
Join Date: Sep 2012
Default

Isn't the clutchnet stuff all just paint anyway? Also... if you make the PP super stiff, get ready to kiss your clutch cable goodbye if it hasn't snapped yet.

Furthermore, this doesn't really leave you anyplace to go from here when you blow up your transmission.
EivlEvo is offline   Reply With Quote
Old 05-16-2018, 01:19 PM   #5
JohnMc
PV Abuser
 
JohnMc's Avatar
 
Join Date: May 2004
Location: St. Louis
Default

Hah, I remember when I put a Clutchnet clutch into my FT'ed M47 wagon. It lasted about 5 months, 2 1/2 of which were spent waiting out winter in the garage.

And by 'it' I mean the M47. It eventually ate third gear. Not a bad shift, just pedal down on a cool morning, hit 17 psi, boom. Probably around 230 - 240 HP.

__________________
'63 PV Rat Rod
'93 245 16VT Classic #1141
JohnMc is offline   Reply With Quote
Old 05-16-2018, 02:12 PM   #6
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

Yeah I already told him I grenaded 5 m46's in one year and he should upgrade his trans and go with billet steel flywheel but sheet costs money. I lost about 5k when the cast iron dog dish flywheel went on my old cheapo junkyard 12.61 ride, took the whole car and the getrag trans.




I also told him to break in the new clutch for 500 miles at least, lets see what happens..
__________________
1988 245 White slicktop M47 Wagon! 2.5L NA 8v going in.
1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 544K MILES
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in.
sbabbs is offline   Reply With Quote
Old 05-16-2018, 02:35 PM   #7
maxitoman007
Board Member
 
Join Date: Feb 2017
Location: Calgary, Alberta, Canada
Default

Alright i guess all I can do is put it in and see... gonna be hard to stay out of boost for 500 miles but I'll try.
maxitoman007 is offline   Reply With Quote
Old 05-16-2018, 02:40 PM   #8
JohnMc
PV Abuser
 
JohnMc's Avatar
 
Join Date: May 2004
Location: St. Louis
Default

Start saving up for a T5 swap.

Heck, start getting the parts. If you're really making 300 hp, that is.
JohnMc is offline   Reply With Quote
Old 05-16-2018, 03:40 PM   #9
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

Turn your boost down to say 5lbs then...

Also if your clutch slips at 20lbs, and works fine at 18, leave it at 18... Save up for better stuff.
sbabbs is offline   Reply With Quote
Old 05-16-2018, 04:55 PM   #10
EivlEvo
Board Member
 
Join Date: Sep 2012
Default

There is no way you're going to stay out of boost for 500 miles.

Just keep in mind where your legs are and where all those spinny bits are.
EivlEvo is offline   Reply With Quote
Old 05-16-2018, 08:15 PM   #11
dl242gt
Can play the blues
 
dl242gt's Avatar
 
Join Date: Jun 2002
Location: S NJ, a suburb of Phila.
Default

The extra small spring section in the center of the disk helps with vibration and smoothness. The intercooled 240 turbos used the same disk type whereas the 740 turbos with the M46 did not. Probably helps a cable clutch operate smoother.
__________________
Dave,
1982 242 turbo. 339k miles. Lots of good changes.
1993 245 Classic, 415k miles, enem V15. 5spd. IPD bars and chassis braces. Simons sport exhaust from Scandix. chipped ezk. Been a good road warrior.
dl242gt is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 01:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.