bartman1234
New member
- Joined
- Feb 17, 2014
- Location
- Ottawa Canada
Hi all, looking for a LH 2.4 flywheel with 60-2 notches. Does anyone still sell a lightened one?
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I saw that his site was down. I assume no issue's with his product?
As an FYI: if you're planning on doing the Saab viggen 228/215 PP you will need a flywheel that has the dowel pins clocked in between the bolt holes, not next to them.
Didn't realize there were different drill patterns. I know the SAAB Plate fits the STS flywheel.
Damn, you sure did get lucky on those pin holes. Why volvo, just, why???
I do a all new flywheel that with the correct LH2.4 pattern that takes the 240mm 850 cover plate
http://www.classicswede.co.uk/B200___B230_TTV_light_flywheel_for_850R_clutch/p1733344_14964734.aspx
So they'd fit the pressure plates they bought from sachs, obviously.
Damn, you sure did get lucky on those pin holes. Why volvo, just, why???
What transmissions does it work with? You know fit inside the bellhousing besides M90?
I got one gonna use it with my m90 myself. I know it won't fit in m46 or m47 bellhousing. It might if you grind a bunch. Anybody know how much grinding? Anybody done it? Put the TTR 850R flywheel with 850r pressure plate inside m46 or m47 bellhousing?
It sure would be nice to know which years volvo m46 or m47 bellhousings might work with least amount of grinding. If I was selling these I'd find that out before I tried to sell them to unsuspecting people.
The Sachs PP fits both dowel pin patterns.....