• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Part number request, windshield washer check valve

2turbotoys

Salaminizer
Joined
Nov 13, 2007
Location
Reading pa
I'm redoing the windshield washer system on my '78 242 and wanted to include a check valve from a newer car. I have 2 of them but after inspection the diaphragms are bad, I can't remember what cars I got them from though.

Example pic, doesn't have to be that one though.

ZEgsA6hl.jpg


Thanks!
 
It helps the washer fluid lines stay full so the fluid doesn't drain back down to the reservoir. Saves a few seconds of running the pump, squirts faster. (Insert squirting faster joke here)
 
Thanks for the p/n's. I like the 7/9 one better so ordered that. I will definitely run a filter also, just replaced every part in the system except the reservoir, that got a thorough cleaning.
 
Anytime. My old '70's 242's didn't have those valves, so since I replaced all the lines, pump, nozzles, etc, I just want max performance from the system lol, a bit silly but it is a very noticeable difference, and prevents a few dry wipes on the window.
 
Back
Top