• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

240's with adapted wheels?

03-17-2010-2.jpg




102_0422.jpg


TSW Hockenheim R 17x8 et38
Adapters
Frt - 32mm
Rear - 38mm

These wheels are now on my wagon.


D6qPuAkl.jpg

7HwSdSJl.jpg
 
18's? If so specs on the spacers/wheel/tire size

Hell Yes!!!!

That looks bad ass.

Specs and stuff when you have time on the spacers and offset and that jazz.

Sean

Thanks!

Wheels are 18x8.5 et40, 38mm adapters front, 32mm rear. Tires are 235/40 Sumitomo HTR ZIII. Rear fender lips are hammered as flat as I could manage, fronts are rolled/pulled quite a bit with an Eastwood Roller and a bit of hammering.

(I was running the adapters 32mm Front, 38mm Rear with the other wheels, but I had to flip them for these wheels to clear the coilover adjusters up front.)
 
Last edited:
I have some 17x7 (5x114) wheels hanging out, I found out they are +40mm (out from center-line of wheel) what thickness adapter would I need to get to successfully run them on my 82 244T? I was thinking 32 front /32 rear? but IDK
 
I have some 17x7 (5x114) wheels hanging out, I found out they are +40mm (out from center-line of wheel) what thickness adapter would I need to get to successfully run them on my 82 244T? I was thinking 32 front /32 rear? but IDK

32mm will do just fine.

here's 32mm front, 38mm rear with 17x7 et40 wheels
245_021413_web_zps9b12f9d5.jpg
 
17X8 Borbet Type E. 35mm Offset. 25mm adapters in rear, and 20mm adapters in front.

Not rubbing on front, rear needs to be rolled.

Tires are 225/45/17 Bridgestone RE-11



 
Trying to fit 17x8 wheels ET 35 to my 244 (1980). Tires are Pirelli P Zero Nero in 215/45/17. Any recommendation on spacer thickness? Suspension is stock but I might lower the car in the future (1" in the rear and 1.5" in the front).
Will a 20mm spacer in the front be enough? I'm thinking 20mm front and 25mm in the rear (effective offset ET15 front and ET10 in the rear)...

thanks
 
Back
Top