• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

My New Brick

thelostartof

thelostartof

unbalanced chemical
300+ Club
Joined
Jun 26, 2002
Location
Apache Junction, AZ
So this is what $600 will get you, 93' 940 n/a, 175k, regina, L block and AW71L .... yes i have evil plans for this once i get it all street legal.

problems ... drivers door caved in and door handle broken(in the pics is AFTER i hammered most of it out and installed a spare handle)

Needed a Battery, had a bad water pump(top seal blown out), and has no title(1-2 months worth of headache but worth it)

mn9401535.JPG


mn9401536.JPG


mn9401537.JPG


mn9401538.JPG


mn9401539.JPG


mn9401540.JPG


mn9401541.JPG


mn9401542.JPG

mn9401543.JPG

mn9401544.JPG

mn9401545.JPG

mn9401546.JPG

mn9401547.JPG

mn9401548.JPG

mn9401549.JPG

mn9401550.JPG

mn9401551.JPG



This will be my new DD in about 1-2 months once i get new tires along with the title and get it past smog, that way i can take the 91' off the road and do some fun stuff.

So now I own 4 volvo's, 3 of which are n/a regina cars ... hm
 
New crank sensor in, New water pump on and holding coolant, looks like the cam seal leaks really bad so i guess i need to change the valve cover gasket and the cam seal before i can take it to the DMV to get it checked

oh and off the 8 speakers in the car only the two on the dash work ... doh

my9401538.JPG


my9401539.JPG
 
That's a great deal! Wish we had trash cans and cardboard strong enough to support our Volvos, here in NY. We have to use jack stands. :(
 
well so far I have also replaced the leaking front cam seal, all 8 valve silencers, valve cover gasket and swapped out the M cam for a T cam. Along with replaced the soon to fail timing belt tensioner. Due to my being to lazy to setup the Intermediate shaft right I just went ahead and threw on a Head mounted dizzy and some old wires for now as the dizzy on the block really needs a new rotor and to have the timing set right haha

otherwise, runs pretty good, shifts through all 4 gears(have not tried the lockup yet). stops really really well. Just needs tires, check the brakes, and figure out why the drivers window will not go down(i think it might be because of the trashed door but we shall see.)

A/C is ice cold and heat is nice and hot.
 
timing is non adjustable :slap:

not a bad deal, looks the damage is confined to the one door, always a plus.

So whats with the levitating 740 in the background?
 
You must log in or register to reply here.
Back
Top