• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

need inspiration about exhaust on 240

Dave_242gt

Member
Joined
May 21, 2008
Location
Sherbrooke, Qc
post picture of your custom exhaust system preferably from a 240 ;-) i need some inspiration for end my ... i try put up side the diff. so lower car and 3inch i hard to go!
thanks
 
Someday I'll have something helpful to post. Until then have this.

373899e3.jpg
 
so under the diff ... the pipe dont hit the ground on heavy bump ??

Impossible on a flat road. If it were a heavily rutted road, maybe it would catch a rock, but I don't drive this car off road at all. It's too low.

I bought some nice, heavy duty rubber hangers from Summit Racing. Search "Dynomax Performance 35460". They work well to hold up the heavy 3" steel.

I have one hanger at the stock position for the 240 front muffler, then I added one to the frame rail behind the right rear tire (see the clamp here, just used for a universal metal/rubber hanger bolted to the frame rail where the triangle piece used to be bolted), then I have another hanger at the stock rear muffler position (just a tailpipe straight out the back).

127832563.jpg
 
Back
Top