• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Newbie with some 242TI pictures...

Willard

New member
Joined
Jul 22, 2003
Location
Charlotte, N.C.
It has been a while since I was here. :-(
Here are some recient pictures of my baby. Let me know what you think.

:lol:

Info:
-Will from Charlotte
-1984 242TI 259,000 miles (got her with ~94,000)
-stock interior was replaced with the cloth a few years back

You have to sign up to view the album and the large versions of the photos.
http://www.imagestation.com/album/?id=4289604105

fb99c9af.jpg


fb99c8fb.jpg


fb99c828.jpg


fb99c808.jpg
 
thanks for the comments.

it is the original paint... but it is getting thin in some spots. :-(

Quick mod list:
-oil temp gauge
-3" MPV pipe
-50 trim compressor housing
-removed a/c and p/s (installed old rack)
-EFI intake manifold
-larger intake piping
-Piersberg bypass valve (soon to have a Bosch one in it's place)
-flexable oil inlet line
-newer turbo exhaust manifold
-aluminum timing belt cover
-IPD 25mm bars
-Bilstein shocks (came off of my 244GL ~170,000 total miles on them) :eek:
-IPD lowering coils (1/2 wind cut off of the fronts)
-poly torque rod bushings
-replaced 'all' other bushings with OE
-lighter flywheel and clutch (not as good as the TI clutch and flywheel (will be swapping back soon))
-M46D aluminum case tranny
-removed power locks, mirrors and windscreen washer
 
You can view the large versions of the pictures that are shown (if you are not a imagestation member) if you add .orig.jpg to the end of the picture link.

Here are a few more pics... tell me to stop if I am being obnoxious.

fb99c964.jpg


fb99c924.jpg


fb99c8b5.jpg


fb99c88b.jpg
 
Back
Top