89_740Turbo
New member
- Joined
- Apr 10, 2018
- Location
- Central New Jersey
While looking to install a new MBC on my 740Ti, I was looking for a Boost Gauge. Obviously there are the pods which a lot of people use but I want to eliminate as much clutter as I can and keep things neat.
dl242gt told me that Dave sells custom 740 boost gauges to replace the stock on on the dash cluster. After taking a look, they are amazing. So here's my install documentation of Daves custom Boost Gauge face and how it looks plus my new MBC.
First dl242gt and I removed the dash cluster and removed all connectors. The battery was disconnected from the car at this point.
Here it is totally removed. The rear side of it
Here is Daves custom Boost Gauge face to replace the stock one. He offers 3 different kinds but this one was the most visually appealing and useful one. Its also a matter of preference. Its very clean and neatly made.
Following Daves instructions, we removed what should be removed. Here is everything that you will need to take off.
You can peel off the stock boost gauge face with your finger nails or a flat head screw driver.
dl242gt taking it off.
Here is everything being screwed back in. The things that we removed of course hahaha
Here is the new boost gauge face in. Thanks Dave for making it look so amazing!
Here is what the whole thing looks like with it on
Now onto the boost controller. Here is my current setup.
Removal of the tubing. This was pretty straight forward.
After the new tubing is set up. Separate hoses for the MBC
Here is the new MBC to go with Daves new boost gauge face. Nice and red like the car
dl242gt told me that Dave sells custom 740 boost gauges to replace the stock on on the dash cluster. After taking a look, they are amazing. So here's my install documentation of Daves custom Boost Gauge face and how it looks plus my new MBC.
First dl242gt and I removed the dash cluster and removed all connectors. The battery was disconnected from the car at this point.
Here it is totally removed. The rear side of it
Here is Daves custom Boost Gauge face to replace the stock one. He offers 3 different kinds but this one was the most visually appealing and useful one. Its also a matter of preference. Its very clean and neatly made.
Following Daves instructions, we removed what should be removed. Here is everything that you will need to take off.
You can peel off the stock boost gauge face with your finger nails or a flat head screw driver.
dl242gt taking it off.
Here is everything being screwed back in. The things that we removed of course hahaha
Here is the new boost gauge face in. Thanks Dave for making it look so amazing!
Here is what the whole thing looks like with it on
Now onto the boost controller. Here is my current setup.
Removal of the tubing. This was pretty straight forward.
After the new tubing is set up. Separate hoses for the MBC
Here is the new MBC to go with Daves new boost gauge face. Nice and red like the car
Last edited: