B230ft throttle pot, is there a bolt on?

So apparently what we thought was a throttle pot seems to be acting like a switch.
I have a standalone ecu emu, is there a bolt on throttle potentiometer for the b230ft? Short of fabricating a bracket and making one work.

I made a bracket to use the 960 potentiometer on the LH2.4 throttle body.

Took some 3mm plate, very basic tools and 30 minutes of time. Why would that hold you back?

https://yoshifab.com/store/b230-tps-adapter.html

or the LH3.1 cars came with a factory potentiometer TPS, if you can find one.

There's a pot that was standard on a few different production vehicles that basically screws straight onto the throttle body. If memory serves I had to cut down the steel plate that the old switch bolts to and use it as a spacer. Think I trimmed the throttle spindle as well but could have spaced the pot out instead.

The part number is MJC100021.