Non-ABS coilovers into ABS car

Just realized that the car I previous had these coilovers in didn't have ABS. Seems like there are three options for using these in my 1993 245:

Option 1: Don't use ABS. Pull whatever's necessary to stop the car from yelling at me, etc.

Option 2: Send these back to JVAB, plus new cores, to be remade for ABS.

Option 3: Drill and tap a spot for the wheel sensor. Has anyone successfully done this?

Thoughts? I'd like to keep ABS if reasonably possible, as it's a nice safety feature for a nice weather / weekend car.

It depends on whether you learned to drive without ABS.

You can't drill and tap for ABS on non ABS 240 knuckles if you're using the stock ABS rings. The diameter is too large. Following the Buchka's example, I machined a bracket and welded it on. It worked fine.