Duder
Watch it man, there's a beverage here!
- Joined
- Dec 9, 2009
- Location
- Torrance, CA USA
Have you considered stacking multiple oil restrictors in series? 0.030" may not be a small enough flow restriction at the kind of pressures these whiteblocks run.
These ball bearing turbos can survive down to as little as 0.5 L/min of oil flow at full load in my experience.
Factory oil return location on the engine should give you the best chance of success if it is still a drainage issue.
These ball bearing turbos can survive down to as little as 0.5 L/min of oil flow at full load in my experience.
Factory oil return location on the engine should give you the best chance of success if it is still a drainage issue.