- Joined
- Jul 30, 2002
- Location
- Rockville, MD
I'm sure we can work something out if you're really interested.
I am interested... but i need to finish all the flare work first before i can consider worrying about paint...
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I'm sure we can work something out if you're really interested.
I am interested... but i need to finish all the flare work first before i can consider worrying about paint...
Ask again in 2018?
2040
Looks good.
Any pics/details of the brake booster that was used?
It's out of an S40, but I'm not sure what year, or what all was done to make it work. The bad part about it that the reservoir it tall and blocks the strut to firewall brace.
Send me one and I'll try it out.I bet this would clear,
http://www.kaplhenke.com/index.php?option=com_content&task=view&id=89&Itemid=32
shameless plug.
put the pins in the wrong spot! #groupAhoodpins
Both locations were used, as seen here:
http://www.pbase.com/towerymt/image/9401976.jpg
I prefer the wider spacing, that little corner is quite strong. But if you cut out all the support structure of the hood, it'll flop at the center as we saw on another 240 at the last lemons race (they added a third pin in the center front).
mine
http://www.pbase.com/towerymt/image/135519188.jpg