• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Official LH2.4 EZK Wasted Spark Conversion - Installation Instructions

anyone installed the current board and made pics ? :)


BTW: im gonna install this to a 219 goldbox.. seems to be the same... but.. is it ?
 
I don't have any in-progress pics, but here's Leslie's EZK all buttoned up and ready to go:

photo.JPG


The base EZK board is the same across all the different part numbers, so you shouldn't have any issues.
 
can anyone tell me if there are other powerstages i can use besides 0 227 100 203? i cant find that specific one anywhere.
i have found many with 7 pins with other partnumber but i'm not sure if they work too?
 
i know many people have used ford edis coil for their projects but i also heared some people talking about problems with the edis coil because of some filter inside so they had to use something else. i will try to find out what they mean.
 
Some of the coils have an integrated noise filter/capacitor, the one I have uses an external filter so it can easily be removed if needed.
 
Here's some pics of how I did mine. Unfortunately, my box has EGR so I couldn't piggy back the pins like I was hoping. I used a Molex panel mount connector and some ribbon wire from an old alarm system I had laying around. The hole for the connector to mount in is kinda crappy and looks too big, but the tabs on the connector are huge, so it had to be that size.

148988_404068476290337_100000615636342_1229996_1660470111_n.jpg


536470_404068636290321_100000615636342_1229997_15974547_n.jpg


562412_404069156290269_100000615636342_1230000_783897405_n.jpg
 
its goldish... think its the flash which makes it looks so fancy.. but the really fancy part here is... its a 214... i've never heard of a 214er EZK which is gold before... only the 219 aka "goldbox"
 
I've sourced all the standard parts (Bosch 2x2 + 3 channel driver) but the coil pack has unusual HT connections. I got a set of punto leads with the 2nd hand coil I got on ebay (?1.04+postage :)) It seems to have 4mm pins in the coil pack, distributors connections are female normally. Standard distributor end may work, but I suspect they may not be reliable.

I had a good search and not been able to find the necessary terminal to make up my own leads. I can use the ones from the Punto with new cables, but it may weaken the terminals.

Anyone found a source, or are standard leads a reliable bodge?

I would add a photo on the Punto lead connectors, but I'm not allowed.
 
Back
Top