• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Need help oil filter fitting

Los_215

New member
Joined
Oct 7, 2017
Hey i need help with my engine, i was building my engine and i realized im missing the oil filter fitting and when i went to check my other engine it is not removable so i dont know what tread or size or anything as to where to get it any help.will be appreciated

6Vk22xAykhDsxqP5PuMxZzARinS3PBRbhBGNg2IhbxjPrEq0g8a7n7x2Xstajxz-lvdI5xYFEsDgkCJO9I48UbN2FW-6Zl8ygj98eCDAF_6hp7bHzXYSRpB0O1KxZBeNLL9sly-OqgCMousZ0c8-NWBLrBysA-I-b25SmgnfsBvFjBJJIWWbK95gJlZ3jQky1dDtZIBL2UQUthwDfzCbNvDb4kylTkdyBndGXJJKXeeMi5d5gtdY5KbC-0e1Prp6Cr6g9cczDWRnAPYBTZs35SkAZn4yZsxhNiYXhJHLcjEUMzxt57ugZk7AvldTUJeFldcl4CxSlp71n_XNgWr79a47UIxYibbz-zVU14bXg19ErgmA_jJYe8VNfo9AwCOlNC8eghpOkHCQhvY4mZ4X4R7Pzm8pzLLcX-MKtT61Eg0DQx_YLOlLj2_mxTuH3_PZxz-s5vULC-ZXEbnoydIY_ALRFUoS1foZ0wX6qk61AecF-ZiR1R8R7ExHqMzW5aPuTcvW71h2QN1eRsnmwLLj0w4jbaEDLw1zx_pSf3vKCepsoyhh7Wo_PbeqqHQ9esRRxNxP0xDPRLd7W_q8fW2IZtezWssLNxDcsYasHYW3-zRfgMx5PPAq04jN9Xxkww=w525-h394-p-k-nu
 
All of the oil filter threaded studs are removable.

The easiest way is to use a pair of nuts threaded onto the stud and then tighten the 2 nuts against each other. If you tighten the 2 nuts properly you can use the hex on the inner nut to unscrew the stud.
 
Back
Top