• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Volvo 16v wasted spark build questions

Sven's245

New member
Joined
Apr 5, 2010
Location
bothell wa
Hello all. Im currently gathering the last few parts of my 16v head swap onto my LH 2.4 b230ft.

So ill be using the Buchka wasted spark set up and I wondering if it will be okay if I use the the stock LH 2.4 ECU instead of the micro squirt? will the engine run okay? Im trying to understand everything before I start tearing into things.

From what I understand when using micro squirt is I would be able to tune the engine for optimal performance?

Ive heard of people using the LH 2.4 with a 16v head and having success with the proper air fuels ratios and performance?

Any Suggestions?

thanks in advanced!
 
My 16v/ HX52 uses ( temporarily for running in/ proving engine ) the LH2.4 and 8v distributor I used on my 8v set up as it was with ecu & ezk chips for the vxr injectors with stock AMM and 6800 limit. Starts and runs fine so far. It’s a good starting point.
 
Back
Top