Custom Airbag Control Arms for the 122

I spent the day today designing and modifying the factory control arm to accept an air bag and to give the car about 2 more inches of drop. I now have about 8 inches of movement up and down in the front and it gets it down to about 2 inches off the ground. It should lay the lake pipes on the ground once I get them.

Here are a couple vids I took:

The first is a vod of the bag itself and the arm:
http://www.hardcars.com/blown240/122%20pics/front%20bag%20arm.MPG

The second is from the sie of the car:
http://www.hardcars.com/blown240/122%20pics/front%20bags.MPG

Here are some pics:











I did see the crack in the last pic and I fixed it.

Dude, those are sooooo....agricultural looking!!
And from the Cobblemaster, that is a compliment. Sort of.

Hmm.....Well.....Thanks....(I think )

I hope you cleaned stuff before welding

Ya It was nice and clean bare steel where I needed to weld.