Turbosteen
I was born at a young age
- Joined
- Sep 4, 2008
- Location
- The Netherlands, Europe
More info on the seats? Available in green?
Looks nice!
Looks nice!
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
More info on the seats? Available in green?
Looks nice!
You may run into an issue with the rear brake lines where the steelflex line attaches to the axle, the form of the coupling can be wrong for the hard line on the axle. The thread fits but the end of the steelflex line is like this > and the end of the hard line is like that too <. You need > to > flared. Kinda hard to explain here but on my 240 i ran into that issue, also have Goodridge lines but maybe this seller sells the correct set? Fixed it by modifying the copper tubing on the rear axle.
Looking at the axle from the rear of the car, there should be a sticker on the axle tube on the left side. The ratio will be there. I've held a razor blade perpendicular to the axle tube and scraped the coating off the sticker that way.
What year is the axle from and what engine did the car have? Could be a 3.31 if it's from a manual trans car.